parsons-adl-inc
Results: 70
Cutting Board (Model 16K013)
The Cutting Board, model 16K013, is designed for use by individuals with the use of only one hand, arthritis, neurological disabilities, or spinal cord injury. This polypropylene unit firmly attaches to a counter-top or table with the use of four attached suction cups designed to hold the board in a stable position. The board can be used to make sandwiches, slice meats and chop vegetables. Features include three 1-inch stainless steel spikes that securely grasp meats and vegetables, and a two p
Wheelchair / Walker Pouch (Model 16C002)
The Wheelchair / Walker Pouch, model 16C002, is a wheelchair side pouch and a carrying bag for walker designed for use by people with balance, lower extremity, mobility and walking disabilities, spinal cord injury and others who use a walker or wheelchair. Made of leatherette material, this pouch features a single pocket for storage of magazines or other small items. The pouch attaches over a cross bar and is held in place with dome snaps. The pocket fastens with Velcro closure. DIMENSIONS (LxW)
Wheelchair Push Gloves (Model 16C017A)
The Wheelchair Push Gloves, model 16C017A, are push gloves designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury, and others who use manual wheelchairs. Made with suede palms and mesh backs, these bicycle-style push gloves are designed to help protect the hands from blisters and injury while propelling a wheelchair. The open mesh back allows for ventilation while the padded palm area is durable and has a no slip grip. The gloves have open fingers, a ha
Wheelchair Four Point Seat Belt - Auto Buckle (Models 16C138S, 16C138M & 16C138L)
The Wheelchair Four Point Belt Seat Belt - Auto Buckle, models 16C138S, 16C138M & 16C138L, is a wheelchair seatbelt designed to provide security and positioning assistance for wheelchair users and those suffering with posterior and anterior pelvic tilt, and pelvic rotation and thrusting. Designed with 2-inch webbing with fastening tabs for mounting, this belt is equipped with a center pull and four point secondary straps for preventing shifting during thrusting, wiggling, or sliding movement
Denim Arm Walker Pouch (Model 16C188A)
The Denim Arm Walker Pouch, model 16C188A, is a carrying bag for walkers designed for use by individuals with walking or balance disabilities. This pouch has a large full width pocket in the denim section and three pockets in the front section. The pouch attaches to a walker's cross bar with a Velcro closure. DIMENSIONS (DxW): 8 x 13 inches. COLOR: Blue denim with white front panel.
Contoured Shawl (Model 16C301A)
The Contoured Shawl, model 16C301A, is a poncho or shawl designed for use by individuals who use wheelchairs. Designed specifically for use while a person is seated, this knee length shawl goes over the head requiring no arm insertion. This shawl has a high collar that can be turned up to protect the neck and ears from the cold. Other features include an overlapping front that fastens at the neck with hook and loop fastener. The shawl is made of polar fleece material. DIMENSIONS (LxW): 47 x 27 i
Rain Poncho (Model 16C302Al)
The Rain Poncho, model 16C302AL, is a rain cape or poncho designed for use by men who use wheelchairs. This fleece-lined poncho was designed by a wheelchair user to make dressing easy and to provide features needed for outside use. The poncho has an extended front and short sleeves with adjustable cuffs. The sleeve opening is wide at the body of the poncho to facilitate dressing. The cuff fastens around the wrist with hook and loop tabs that provide arm coverage while leaving the hands free. Oth
Wheelchair Rain Cape (Model 16C300A)
The Wheelchair Rain Cape, model 16C300A, is designed for use by individuals who use wheelchairs. Designed to provide protection for the user and the wheelchair, this full length cape has a Velcro closure that can be opened and closed from the inside as well as the outside. The cape features an attached hood with double thickness for added protection for the neck and head. SIZE: One size. COLOR: Navy blue.
Lined Waterproof Leggings (Model 16C306A)
The Lined Waterproof Leggings, model 16C306A, are leg warmers designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury, paraplegia or quadriplegia. These leggings are made from waterproof nylon shell with a polar fleece lining to keep the legs and feet warm. Features include side panels that cover the hips and anchor the legging, a wide elastic top, and a waterproof elastic foot to keep shoe uppers dry. Each legging has a full length inseam zipper that op
Finger Grip Key Turner (Model 16H148)
The Finger Grip Key Turner, model 16H148, is a key holder designed for use by individuals with grasping or fine motor disabilities or arthritis. It is intended to enhance a person's ability to hold and turn a key. This key turner consists of a plastic piece with two large plastic finger loops that attaches to the base of a key with a screw so the loops extend from either side of the key. The user places his or her fingers through the loops, places the key in the lock, and rotates to lock or unlo
Safety Tread (Model 16H158)
The Safety Tread, model 16H158, is a safety tread and non-slip floor covering designed for use by individuals with balance or mobility disabilities. Designed to reduce the risk of slip, trips and falls, this slip resistant tread strip is made of sandpaper-like material to provide safer footing around a house, cottage, car and outdoors. The strip can be cut and sized to be placed on slippery steps, stairs, wheelchair footrests, and poolside or in the bathroom. DIMENSIONS (LxW): 60 x 2 inches.
Long Handle Oven Cleaner (Model 16K049)
The Long Handle Oven Cleaner, model 16K049, is an oven cleaning aid designed for use by individuals with mobility or upper extremity disabilities. The device consists of a double-sided sponge / scouring pad attached to a long, epoxy coated aluminum handle. The long handle allows the user to reach the back of the oven with less bending and reaching efforts when cleaning. DIMENSIONS: Sponge is 3 x 5 inches. The handle is 21 inches long.
Vinyl Clothing Protector (Model 16T080)
The Vinyl Clothing Protector, model 16T080, is a bib designed for use by individuals with eating, swallowing, upper extremity, fine motor or severe physical disabilities. Made of durable but lightweight cloth backed vinyl, this large bib features a three inch bottom pocket that opens with Velcro to catch spills. Velcro is also used to attach at the back of the neck. DIMENSIONS (LxW): 24 x 18 inches. COLOR: Blue and white
Inner Lip Plate (Models 16T119 & 16T119B)
The Inner Lip Plate, models 16T119 and 16T119BL, is an inner lip plate designed for use by individuals with the use of only one hand or with other upper extremity disabilities. The plate assists individuals in self-feeding by featuring a deep inner lip that holds food on the plate while the user brings the fork or spoon to the edge of the plate to push the food onto the utensil. The inner lip also aids in preventing spills. This no-slip sandstone plate is break proof and microwavable. DIMENSIONS
Mowbray Toilet Frame (Model 16B285A)
The Mowbray Toilet Frame, model 16B285A, is a height adjustable toilet frame with elevated seat designed for use by individuals with balance, lower extremity or mobility disabilities. The frame's one-piece molded, contoured seat is ergonomically designed to provide good thigh support. A front cut-away in the seat allows easier personal cleaning. It has a coated steel frame with inner numbering on the legs for quick and easy height adjustments, and rubber ferrules at the base of the legs. The ent
Parsons Clip On Cane Holder (Model 14A029)
The Parsons Clip On Cane Holder, model 14A029, is a lightweight cane holder designed for use by individuals with walking or balance disabilities who use canes. The cane holder secures the cane to the belt of the user's pants allowing freedom of both hands. The clip has a sturdy steel clip, clear Lexanbacking, and hook and loop webbing. DIMENSIONS: (LxW): 2 x 3 inches.
Wrist Strap For Cane (Model 14A022)
The Wrist Strap For Cane, model 14A022, is a wrist strap designed for use by walking cane users. The wrist strap features a soft webbing loop that attaches to the handle of the cane with a Velcro band.
Padded Swivel Cushion With Carry Strap (Model 14A063-1)
The Padded Swivel Cushion With Carry Strap, model 77142, is a swivel cushion designed for use by individuals with back pain and mobility disabilities. This transfer cushion takes pressure and strain off the back and hips while turning when driving an automobile. It consists of a soft, lightweight foam-padded seat with a velour cover and comes with a carrying strap. The seat rotates at 360 degrees. CAPACITY: 300 pounds. DIMENSIONS: 1 inch thick. COLOR: Velour cover is gray.
Parsons Slide Buddy (Model 14A089)
The Parsons Slide Buddy, model 14A089, is a dual-purpose transfer aid designed for use in positioning and transferring individuals with mobility disabilities. The waterproof nylon slide side has a non-slip base that aids a caregiver in positioning the person when entering or exiting an automobile. The reverse side features slippery nylon and six hand holds to aid in transferring from a bed or sofa. DIMENSIONS: (LxW): 30 x 35 inches.
Swivel Shower Seat (Model 16B104A)
The Swivel Shower Seat, model 168104A, is a shower stool designed for use by individuals with balance or mobility disabilities. This seat features removable, height-adjustable aluminum legs with suction tips. It has 5 holes for easy cleaning with a soft seat pad for turning. DIMEMSIONS: (HxD): 18 to 25 x 12.75 inches in diameter. CAPACITY: 275 pounds.
Deluxe Bariatric Commode (Model 16B306A)
The Deluxe Bariatric Commode, model 16B306A, is designed for use by individuals with mobility disabilities. The welded frame of this commode is constructed of one-inch steel tubing that is zinc plated and powder coated for durability. Features include an extra-large seat, complete pail, and the ability to fit over most toilets. DIMENSIONS (LxW): 18.5 x 27.75 inches. The height under the seat adjusts from 17.5 to 21.5 inches; the seat height is 22 inches. The width between the arms is 25.5 inches
Adjustable Transfer Bench (Model 16B903A)
The Adjustable Transfer Bench, model 16B903A, is a transfer bench designed for use by individuals with mobility disabilities or spinal cord injury. The bench features a built-in handheld shower holder and suction feet and it adapts easily for left- or right-hand tubs. DIMENSIONS (HxW): 16 to 21 x 30 inches. CAPACITY: 350 pounds.
Folding Cane Seat (Model 14A081)
The Folding Cane Seat, model 14A081, is a cane with seat designed for use by individuals with balance or walking disabilities. This lightweight walking stick opens to a sturdy seat to aid users who need assistance in either standing or resting. The cane is made of extra- strength, anodized aluminum and polypropylene plastic with heat-treated rivets. DIMENSIONS (HxLxW): Seat is 21 x 8 x 8 inches. The cane is 34 inches tall. CAPACITY: 250 pounds. WEIGHT: 28 ounces.
Easy Caddy (Model 14A108A)
The Easy Caddy, model 14A108A, is a carrying tray and cup holder designed for use by individuals who use walkers. This tray clips in place on most folding wheeled walkers. It features a large compartment and a smaller shallower section. The top tray is recessed to hold items such as a dinner plate in place. The contoured sides have no dirt traps. A cup holder helps prevent spillage. The tray is made from durable plastic, supports up to 4.4 pounds, and can be cleaned by hand or in a domestic dish
The Gripper (Model 16L003A)
The Gripper, model 18L003A, is a knob turner designed for use by individuals with fine motor or grasping disabilities, arthritis, or limited hand strength. This indoor/outdoor gripper fits over existing handles such as spigots and other hard-to-turn handles. It comes with two separate grip locks making it compatible with most valve and spigot handles. The device also features red and blue indicator caps that aid in identifying hot and cold valves in the laundry area.
Rolling 3 Leg Stool (Model 20H014A)
The Rolling 3 Leg Stool, model 20H014A, is a caster stool designed for use by seniors or individuals with balance or mobility disabilities or arthritis. This lightweight, three-legged stool has fully rotating, non-locking casters and a padded seat. Designed for working at a near standing position, the stool supports 90 percent of body weight while allowing the user to move around in small work areas. It can be used in kitchens, workshops, or bathrooms. DIMENSIONS: Seat height is adjustable from
Shoe Remover (Model 16D015A)
The Shoe Remover, model 16D015A, is a shoe aid designed for use by individuals with lower extremity, or mobility disabilities, arthritis, spinal cord injury or back pain. This device enables the user to remove shoes without bending. The shoe remover is made of wear-resistant plastic. DIMENSIONS (HxW): 14 x 4 inches.
Stove Knob Turner, Long (Model 16K023)
The Stove Knob Turner, Long, model 16K023, is a knob turner designed for use by individuals with mobility disabilities, arthritis, grasping or fine motor disabilities, or limited hand strength. This stove knob turner features a lightweight scratch free aluminum rod with a long handle that aids the user in grasping and turning stove knobs or reaching over hot pots.
Tap Turner (Model 16K025)
The Tap Turner, model 16K025, is a tap turner designed for use by individuals with fine motor or grasping disabilities, arthritis, or limited hand strength. This device clamps onto a water tap or a door knob to convert knobs that are difficult to turn into levers. DIMENSIONS: 2 inches (6 centimeters) diameter.
Dycem Jar Opener (Model 16K027A)
The Dycem Jar Opener, model 16K027A, is a jar opener designed for use by individuals with upper extremity disabilities, arthritis, or grasping disabilities. The device is a hollow cone lined with Dycem, which exerts a strong grip on most surfaces. The user places it over the top of the jar and turns. The device can be used to open jars with lids from 1 to 4 inches in diameter. COLOR: Blue.
Vegetable Scrubber (Model 16K035)
The Vegetable Scrubber, model 16K035, is a vegetable brush designed for use by individuals with arthritis or other grasping disabilities. The scrub brush has suction cups underneath that can be mounted on a kitchen counter or inside a sink to hold the scrubber in place during use.
Swedish Tap Turner (Model 16K037A)
The Swedish Tap Turner, model 16K037A, is a multi-pin tap and knob turner designed for use by individuals with arthritis, grasping disabilities, or limited grip strength. This device features a large handle and multiple nylon pins on the face to grasp many shapes of taps and knobs. The device is made of plastic.
Stirex Fork Knife (Model 16K038A)
The Stirex Fork Knife, model 16K038A, is combination fork and knife with built-up handle designed for use by individuals with arthritis, grasping disabilities, or with use of only one hand. This utensil features an upright handle set at 90 degrees to the blade and a stainless steel blade with a two prong fork-like tip. The user's arm can remain with wrist straight while slicing and lifting food. DIMENSIONS: The blade is 4.5 inches long.
Push / Pull Oven Rack Stick (Model16K042)
The Push Pull Oven Rack Stick, model 16K042, is an oven aid designed for use by individuals with mobility or upper extremity disabilities or who use wheelchairs. This device can be used as a reacher or to take racks in an out of ovens. DIMENSIONS: 13 inches long.
Reflex 8 Inch Chefs Knife (Model Aa5245)
The Reflex 8” Chefs Knife, model AA5245, is a kitchen knife designed for use by individuals with arthritis or limited hand and arm strength. The smooth edged reflex handle gives the user more ease in cutting. DIMENSIONS: 8 inch smooth edge.
Buckingham Coolhand Plate Gripper (Model 16K029A)
The Buckingham Coolhand Plate Gripper, model 16K029A, is a grasping aid for the hand designed for use by individuals with arthritis or limited hand strength. Using leverage to lift plates, the entire hand-like gripper carries the weight. This non-slip, easy-to-clean device grips and releases most plates as if using the hand and there are no dirt traps.
High Seat Cushion (Model 16H020)
The High Seat Cushion, model 16H020, is a foam seat cushion designed for use by individuals with lower extremity disabilities. This cushion has a vinyl cover with a wood base. It is designed to take the stress off legs and knees by elevating seating levels when customary furniture heights are too low. It comes with an over the shoulder strap for carrying. DIMENSIONS (HxLxW): 16 x 16 x 4 inches.
Wallet Size Magnifier (Model 16H028)
The Wallet Size Magnifier, model 16H028, is a flexible plastic hand magnifier designed for use by individuals with low vision. The size of a credit card, this magnifier provides 2x magnification and can be carried in a wallet, pocket, or purse.
Magnifier On A Stand (Model 16H039)
The Magnifier on a Stand, model 16H039, is a hands free magnifier designed for use by individuals with low vision. This 2x magnifier features a weighted stand base, an attachable clamping device, and an extendable arm that allows the magnifier to be positioned at different heights and angles. The stand base can be attached to the surface of a table or desk. DIMENSIONS: 8.5 x 6.75 inches.
Comfort Pen (Model 16H139)
The Comfort Pen, model 16H139, is a writing aid designed for use by individuals with upper extremity or mobility disabilities or limited hand and arm strength. Its shape and size allow a bent thumb grasp and prevent pressure points developing in the fold of the thumb. It also prevents straining of the forefinger. The pen can be filled with weights such as lead pellets or sand to produce weight variations.
Telepal Mini Phone Amplifier (Model 16H143A)
The Telepal Mini Phone Amplifier, model 16H143A, is a telephone handset amplifier designed for use by individuals who are hard of hearing. This lightweight unit fits over most standard telephone handsets to amplify incoming voices. The unit has a volume control. POWER: Uses 1 triple-A battery (included).
Parsons Netted Walker Pouch (Model 16C191A)
The Parsons Netted Walker Pouch, model 16C191A, is a carrying bag for walkers designed for use by individuals with walking or balance disabilities. This pouch has many pockets, including private pockets and pockets that are visible because of the netting. The front features one zippered private pocket, one open private pocket, and one mesh pocket. The back features a large see-through mesh pocket so the user can see what he or she is carrying. A hook- and-loop strap attaches the pouch to the cro
Nylon Back Pack (Model 16C005)
The Nylon Back Pack, model 16C005, is a wheelchair back pouch designed for use by individuals who use wheelchairs. Made of heavy- weight cordura nylon, this pouch carries small items and features nylon straps for hanging over wheelchair handles, two outside pockets, and Velcro closure flaps. DIMENSIONS: (HxW): 15 x 14 inches.
Wheelchair Arm Pouch (Model 16C003)
The Wheelchair Arm Pouch, model 16C003, is a wheelchair side pouch designed for use by wheelchair users. The pouch is designed to fit wheelchairs with desk-length arms and can also be used with walkers. It is made of leatherette material. DIMENSIONS: 8 x 9 inches.
Wheelchair Back Pack, Vinyl (Model 16C004)
The Wheelchair Back Pack, Vinyl, model 16C004, is a wheelchair back pouch designed for use by wheelchair users. This large leatherette bag has a weather flap and an inside pocket. The bag accommodates large items such as sweaters, blankets, or larger daily living aids. DIMENSIONS: (LxW): 17 x 16 inches.
Lexan Half Lap Tray, Left (Model 16C012-1L) & Lexan Half Lap Tray, Right (Model 16C012-1R)
The Lexan Half Lap Tray is a lap tray is designed for use by individuals who use wheelchairs. This tray has an epoxy-coated-steel slide- on mounting bracket. A hinged system allows the clear, see-through tray section to fold completely over thus leveling it with the side of the wheelchair when not in use. No tools are required for attachment. Model 16C012-1R is for right-handed use and model 16C012-1L is for left-handed use. DIMENSIONS (WxL): 10 x 20 inches.
Padded Half Lap Tray, Left (Model 16C012-2L) & Padded Half Lap Tray, Right (Model 16C012-2R)
The Padded Half Lap Tray is a lap tray designed for use by individuals who use wheelchairs. This tray has the epoxy-coated-steel slide-on mounting bracket. The hinged system allows for complete folding of the tray section thus leveling it with the side of the wheelchair. No tools are required for attachment. The tray section is padded with poly foam and covered with vinyl. Model 16C012-1L is designed for left-handed use and model 16C012-1R is designed for right-handed use. DIMEMSIONS: (WxL) 1
Clip On Ashtray (Model 16C034)
The Clip-On Ashtray, model 16C034, is a clip-on ashtray designed for use by individuals who use wheelchairs. A secure mounting system attaches the ashtray to the wheelchair. Two clips snap over the wheelchair tubing and for additional security, a rubber ring snaps over the ends of the clips to lock the unit in place to eliminate spilled ashes.
Clamp-On Cup Holder (Model 16C035)
The Clamp-On Cup Holder, model 16C035, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs. Once the attachment clip (included) is installed onto the chair, the cup holder itself can be removed as needed. There are no tools required. DIMENSIONS: Attachment clips fit 7/8 and 1 inch tubes.
Ashtray With Remote Smoker Tube (Model 16C036)
The Ashtray with Remote Smoker Tube, model 16C036, is a remotesmoking device designed for use by individuals with severe or upper extremity disabilities or spinal cord injury. The consists of a clear tube attached on one end to the inside of the ashtray where the cigarette is placed; the other end of the tube acts as a mouthpiece for the user to smoke. The device is designed so that the cigarette remains contained in the ashtray if the user falls asleep while smoking. DIMENSIONS: The tube is 36
Wheelchair Cane Clip (Model 16C102)
The Wheelchair Cane Clip, model 16C102, is a cane holder designed for use by wheelchair or walker users. One side of the clip can be locked onto a wheelchair using the rubber ring system (included), while the other side is plastisol coated to grip canes, reachers, and other similar devices.
Under Seat Wheelchair Pouch (Model 16C203)
The Under Seat Wheelchair Pouch, model 16C203, is an under seat pocket designed for wheelchair users. This device is designed to provide storage space under the chair and is accessible from the front by the wheelchair user. Made of nylon, it fastens with buckles. DIMENSIONS: (HxLxW) 12 x 11 x 16 inches.
Oxygen Tank Holder (Model 16C204A)
The Oxygen Tank Holder, model 16C204A, is an oxygen carrying case designed for use individuals with respiratory disabilities who use wheelchairs. This nylon tank holder has two mounting straps that are adjustable to fit most wheelchairs. The top strap fits over the push handles of the wheelchair and the bottom strap fits over the tip bars. These straps are long enough to mount the oxygen tank off center to avoid contact with the user’s head and back. This case holds size D and E or other 4-inch
Insulated Mug (Model 16T159)
The Insulated Mug, model 161T59, is a cup with large handle designed for use by individuals with upper extremity or grasping disabilities. This mug is made of high impact thermoplastic with foam insulation and a large loop handle, and holds hot or cold liquids. The outside remains cool even when filled with hot liquids. Spills are minimized by the snap-on lid that also regulates flow. COLOR: Mauve with white top and black handle.
Keep Warm Dish (Model 16T174A)
The Keep Warm Dish, model 16T174A is a food warmer dish designed for use by individuals with upper extremity or eating disabilities or spinal cord injury. The dish is designed to keep food warm throughout the course of the meal. Hot water is poured into the bottom chamber through a plastic funnel and the dish holds 22 ounces of food. The dish is not microwave safe, but it is dishwasher safe when placed on a top rack. DIMENSIONS: (HxW): 2 x 8 inches. WEIGHT: 2 pounds.
Covered Spoon, Twin Pack (Model 16T176A)
The Covered Spoon, Twin Pack, model 16T176A, is a spoon designed for use by adults and children with upper extremity or eating disabilities or tremors. This spoon has a lid that covers approximately two-thirds of the spoon bowl, keeping food on the utensil and limiting spillage. It can hold liquids and smaller pieces of food. The spoon can be taken apart for cleaning and is dishwasher safe.
Gravity Feed Cup (Model 16T177A)
The Gravity Feed Cup, model 16T177A, is a gravity assisted cup designed for use by individuals who have difficulty drinking. This eight-ounce cup assists with drinking using gravity. Liquid intake is controlled by adjusting the position of the cup. A caregiver can position the cup to the desired level as the user sips the liquid through L-shaped straws inserted in the connector near the bottom of the cup. Twelve straws are included and replacements are available in supermarkets. This cup is hand
Parsons Adjustable Book Buddy (Model 16H153)
The Parsons Adjustable Book Buddy, model 16H153, is a bookholder designed for use by individuals with upper extremity disabilities or who spend long periods reading in bed. This bookholder assists persons having difficulty holding a book or magazine in an open position. The frame is made of epoxy-coated stee tubing and the unit has a clear Lexan reading platform with an adjustable ledge. It comes with an elasticized strap to hold the book open to the desired page. The ledge and the angle are fu
Black Big Button Phone (Model 16H141Bk)
The Big Black Button Phone, model 16H141BK, is a large button telephone designed for use by individuals with low vision, arthritis, or fine motor disabilities. It features a speakerphone for hands free use, volume control, and a redial and hold button. A bright LED light flashes to visually signal an incoming call and music plays for callers on hold. This phone also stores up to 13 most-called numbers for automatic dialing.
Cuddle Gel Pink Bear (Model 15E243A)
The Cuddle Gel Pink Bear, model 15E243A, is a hot and cold gel pack designed for use by individuals with arthritis. The gel pack, which can be placed inside the plush bear, provides 40 minutes of warmth. The gel packs are microwavable and freezer safe. The surface can be washed with cold water and mild soap for air drying. OPTIONS: Replacement gel packs are available for purchase. DIMEMSIONS: The bear is 12 inches. COLOR: Pink.
One Touch Storage Containers, Set Of 3 (Model 16K052A)
The One Touch Storage Container, Set of 3, model 16K052A, are easy open storage containers designed for use by individuals with upper extremity disabilities, arthritis, or grasping disabilities. These containers require no twisting or turning to open. Pressing a spot on the rim of the lid with one finger or the palm of the hand causes the lid to open. Pressing the middle of the lid reseals it. The containers come in a set with one each of .50 quart (.75 litre), .90 quart (1.45 litre), 1.85 quart
Scooper Plate With Non Skid Base (Model 16T175A)
The Scooper Plate With Non Skid Base, model 16T175A, is a scoop dish designed for use by individuals with the use of one hand or other upper extremity or eating disabilities. This scoop dish is intended to be used as a combination plate and bowl. The contoured lip or rim can be used to push food onto cutlery. The dish is not recommended for dishwashers or microwaves. DIMENSIONS: (HxLxW): 1.75 x 6 x 7.5 inches.
Glow In The Dark Gripper (Model 16H162A)
The Glow In The Dark Gripper, model 16H162A, is an illuminated door knob gripper designed for individuals with low vision or fine motor or grasping disabilities. Exposure to bright light or sunlight recharges the power of this device. Illuminating power lasts up to eight hours keeping door knobs visible in a dark room for greater safety.
Slip-On Handle (Model 16T061)
The Slip On Handle, model 16T061, is a utensil holder designed for use by individuals with upper extremity or grasping disabilities or spinal cord injury. The outside surface of this holder is vinyl with finger bumps, and the inside core has foam tubing for gripping a spoon, toothbrush, or other cutlery or utensils (not included). SIZE: 1.5 ounces.
Clip-On Spoon (Model 16T031)
The Clip-On Spoon, model 16T031, is a utensil holder designed for use by individuals with upper extremity or grasping disabilities or spinal cord injury. This vinyl covered hand strap fits over the back of the hand and holds a spoon or fork securely. The strap can be bent to fit individual hands. It is dishwasher safe.
Clothing Protector With Snaps (Model 16T083)
The Clothing Protector with Snaps, model 16T083, is an adult bib designed for use by individuals with upper extremity or eating disabilities. The bib covers from neck to lap with snap closure at the neck. It has a polyester cotton front and waterproof backing. DIMENSIONS (LxW): 35 x 18 inches. COLOR: Comes in a variety of colors and patterns.
Bandana Clothing Protector (Model 16T086)
The Bandana Clothing Protector, model 16T086, is a bib designed for use by individuals with eating or upper extremity disabilities. Draped around the front of the neck with a hook-and-loop fastener, this bandana scarf protects the wearer against food or liquid spills. It is made of 100 percent cotton with a moisture proof inner layer. The material is latex free and washable. DIMENSIONS (LxW): 13 x 26 inches. COLOR: Various colors available.
Flex Bar, Red, 10 Lb. Resistance (Model 15E070A)
The Flex Bar, Red, 10 Pound Resistance is a hand exerciser designed for use by individuals with grasping or other upper extremity disabilities. The flex bar is a system of progressive resistance exerciser designed for strengthening wrists, shoulders, grip strength, and improving elbow mobility. This exerciser is lightweight and portable.
Solarshield Sunglasses
Solarshield Sunglasses With Case are sunglasses designed for use by individuals with vision disabilities. They fit over prescription eyeglasses and are intended to block out 100 percent of UVA and UVB sun rays. They feature extra wide side and top bars that provide 40 percent more protection the regular sunglasses. SIZES: Small, medium, large, and extra-large. DIMENSIONS: The small sunglasses fit over glasses up to 4 7/8 x 1.5 inches. The medium sunglasses fit over glasses up to 5 1/16 x 1.5 inc
Seat Belt Alarm
Seat Belt Alarm is designed for older adults and people with varying mobility disabilities. It can be attached to most wheelchairs or devices. The belt alerts staff or caregivers when the buckle is undone. The alarm has an on/off switch, low battery light, and flashing light to help locate the user. The belt has grommets to secure bolts for attaching to chairs. A mounting bracket is included for the alarm. Uses one 9V battery (included). Belt fully extended measures 50 inches (127 centimeters) e